निगरानी कैमरे को कैसे तारें?

1. निगरानी कैमरों के लिए उपयोग किए जाने वाले तार में सर्किट के कार्यशील वोल्टेज से अधिक रेटेड वोल्टेज होना चाहिए; तार का इन्सुलेशन सर्किट की स्थापना विधि और बिछाने की पर्यावरणीय परिस्थितियों के अनुरूप होना चाहिए। तार का क्रॉस-अनुभागीय क्षेत्र बिजली आपूर्ति और यांत्रिक शक्ति की आवश्यकताओं को पूरा करने में सक्षम होना चाहिए।

        2. When wiring the surveillance camera, try to avoid wires with joints. Unless it is impossible to use a connector, the connector of the surveillance camera must be crimped or welded, and the wire connection and branch should not be subjected to mechanical force. The wires that are empty in the pipe should not have connectors under any circumstances. If necessary, put the connectors on the probe terminal of the junction box as much as possible.

        3. The wiring of the surveillance camera should be installed horizontally or vertically in the building. The wiring should be protected by sleeves (plastic or iron water pipes, optional according to the technical requirements of indoor piping), and metal hoses can be used for the ceiling wiring, but they need to be fixed and secure.

4. सर्विलांस कैमरे की सिग्नल लाइन उच्च-पावर पावर लाइन के समानांतर नहीं हो सकती, एक ही ट्यूब में चलने की बात तो दूर। यदि पर्यावरणीय बाधाओं के कारण, तारों को समानांतर में रूट किया जाना चाहिए, और दूरी 50 सेमी से अधिक होनी चाहिए।

        5. The AC power supply of the alarm control box of the surveillance camera should be routed separately. The surveillance camera should not be placed in the same tube with the signal line and low-voltage DC power cord. The installation of the AC power cord should comply with electrical installation standards.

        6. The wiring from the alarm control box of the surveillance camera to the ceiling is required to be managed in the wall or protected by iron pipes to improve the anti-sabotage performance of the anti-theft system.

        7. The technical requirements of indoor piping for surveillance cameras: There are two types of surveillance camera wiring and piping. The piping of the surveillance camera is required to be horizontal and vertical, neat and beautiful. Concealed piping requires short, unobstructed, and few elbows.