1. Selection of raw materials: The functions of the outer sheath of the highly flexible drag chain cable made of different improved materials are also different. Some have anti-low temperature function, some have anti-UV function, and some have oil-resistant function
The wear resistance of the outer sheath of the high-flex drag chain cable is usually very good, no tools will stick to it, and it has high flexibility and support resistance, but if the material is not properly selected, the core may be broken.
2. The conductor is too thin: the cable should choose a conductor with good flexibility. Generally speaking, the thinner the conductor, the better the flexibility of the cable. However, if the conductor is too thin, the cable will be entangled, and there may be insufficient hardness and material when used later. The phenomenon of wear and tear, and the breakage of the highly flexible drag chain cable is even more difficult to avoid.
3. Wrong copper wire winding of the cable: The main reason for this phenomenon is that when the high-flexible towline cable is braided or wound, the handling method of the copper wire joint is wrong, or the anti-twisting function of the high-flexible towline cable is insufficient. These can cause the cable to twist so violently that its braid will snap off on its own.
4. The outer skin is cracked and worn, which may also be due to poor oil resistance and weather resistance.
5. The manufacturer of the cable is not responsible for the overheating of the conductor, insulation breakdown and poor anti-interference results, which are also the reasons for the broken core of the high-flexible towline cable. Therefore, the manufacture of the high-flexible towline cable must ensure the quality. , should choose a reliable manufacturer.
The above are the reasons for the broken core of the high-flexible drag chain cable, mainly in the above situations. In addition, when the cable is installed, if the normal operation is not carried out, it will also lead to the phenomenon of broken core. It is more obvious that the cable is overloaded for a long time. Therefore, if you want to avoid the broken core of the cable, in Special attention should be paid to all aspects of installation and use. If you want to know other cable knowledge, you can also leave a message to us.
